Connection - Macpower & Tytech The Bermuda User Manual & Installation Manual

If the system
doesn't recognize
the drive, turn on
the power first,
before connecting
the USB/SATA
cable.
For safe removal of
your drive and to
assure that no data
is lost, always
follow the unplug
procedure. If not, an
error message will
show up.
Copyright © 2000-2003 by Macpower Peripherals Ltd. - www.macpower.com.tw
Installation on a PC (Microsoft Windows)
Win2000 or WinXP with a USB connection:
• Turn on your Computer and start Windows
• Connect the Bermuda and turn it on
• Let Windows search and install the driver automatically
• Open "My Computer" to see your external hard drive **
Win2000 or WinXP with a Serial ATA connection:
• Turn on your Computer and start Windows
• Connect the Bermuda and turn it on
• Let Windows search and install the driver automatically
• Open "My Computer" to see your external hard drive **
Win98/SE with a USB connection:
• Turn on your Computer and start Windows
• Insert the driver CD into your CD-ROM
• Connect the Bermuda and turn it on (in some cases the
driver must be installed before connecting the device, see
note on CD or readme file)
• Follow the onscreen instructions and install the drivers
• Open "My Computer" to see your external hard drive **
Unplug Procedure:
• Click on the taskbar icon for external hardware
• Choose your external hard drive and confirm to remove it
** For factory new drives and formatting, see "Partitioning &
Formatting"
- 7 -