Table of Contents
Advertisement
You don't usu
ally
have to enter a
username but if
it's
required for log
in,
use guest.
For folders without
password protection,
simply leave the
password field
empty and click O
K
to access it.
Instead of the IP
a
ddress, you can
a
lso type
s
mb://STORAGE or
th
e full name
STORAGE-xxxx,
where xxxx stands
for the last four
digits of your LAN
disk's Mac address.
USER MANUAL
PD-SATA USB/LAN
5.2
File access on a Mac
5.2.1 SMB
To mount and access the network drive, open your Finder, click
on "Go" and choose "Network". Browse for your network drive
with the name STORAGE and click on Connect to access it.
Alternatively, you can use the "Connect to Server" command.
1. Click on "Go" and choose "Connect to Server".
2. Type smb:// followed by the IP address of your LAN disk or
click on the Browse button to locate the folder on your
network. Click on the Connect button once the server
address has been filled out.
Page 29 / Chapter 5 - Network Storage
Advertisement
Table of Contents
