Table of Contents
Advertisement
To reset the device,
to its factory default
settings, press and
hold the reset
button, turn
on the
p
ower and wait for
th
e LED to stop
blinking (~30 sec).
Release the button
and reboot the LAN
disk.
By default, the
e
ncoding is set to
E
nglish. If you want
to store or transfer
files with a different
encoding (different
language), choose
the corresponding
language from the
drop down list.
If the encoding
does not match th
e
language
of your
fi
les, the transfer
can not be
completed and file
names will be
corrupted.
USER MANUAL
PD-SATA USB/LAN
4.2 Web Configura
Open your web browser, enter the IP address of your network
drive and login. The default login is admin/admin.
4.2.1 Status
• Host Name: This name is used to identify your device on the
network. If you prefer a different name that is easier to
identify, click on Change and type in a new name.
• Group Name: This should be the same name as your
workgroup. In general, the default, WORKGROUP will be OK
but if your workstation belongs to a different group, click on
Change to modify the workgroup.
On a PC, right click on My Computer and choose Properties.
Go to the Computer Name tab to see your current workgroup.
For a Mac to join a Windows workgroup, open the directory
access utility (under Applications
and click Configure to modify the settings (administrator
access is required to access this option).
Page 12 / Chapter 4 - LAN Disk Setup
tion
U
tilities). Select SMB
Advertisement
Table of Contents
