Orion II
Be careful not to
damage any
components and
double check the
connection between
the bridge board
and your hard drive
before you close up
the case.
Chapter 2 - Installing the HDD
Your unit may come with a pre-installed hard drive. Before
opening such an enclosure, please read the warranty and any
other notes from your vendor carefully, as this could void your
warranty.
USB 2.0 & eSATA
1. Remove the 2 screws on the rear panel of the enclosure.
2. Slide and lift the cover off the body.
3. Carefully install the hard drive and connect it.
Page 3 / Chapter 2 - Installing the HDD
User Guide