System Requirements; Pc Requirements; Mac Requirements; Interface Information - Macpower & Tytech Pleiades USB/LAN User Manual & Installation Manual

If you forgot the
login, press and
hold the reset
button, turn on the
device and wait for
ten seconds before
releasing it. This will
reset the device to
its factory default
settings.

System Requirements

PC Requirements

• Minimum Intel Processor II 350MHz, 64MB RAM
• USB 1.1 equipped PC; WinME, Win2000, WinXP
• USB 2.0 equipped PC; WinME, Win2000, WinXP
• 10 Mbps, 100 Mbps or 10/100Mbps Fast Ethernet card, or a
USB-to-Ethernet converter equipped PC; Win2000, WinXP

Mac Requirements

• Minimum Apple G3 processor, 64MB RAM
• USB 1.1 equipped Mac; Mac OS 9.1, 9.2, 10.1.5, 10.2, 10.3
• USB 2.0 equipped Mac; Mac OS 10.2, 10.3 or more
• 10 Mbps, 100Mbps or 10/100Mbps Fast Ethernet card, or a
USB-to-Ethernet converter equipped Mac OS 9.2, 10.2 or
more.

Interface Information

- 2 -
1. Status Lights
Amber = HDD Access (HDD)
Yellow = System Status (SYSTEM)
Green = Network Status (LINK)
2. 10/100 Auto sensing port
(RJ-45)
3. Reset Button
4. USB 2.0 Interface
5. Power Receptacle
6. Power Switch