System Requirements; Pc Requirements; Mac Requirements; Package Contents - Macpower & Tytech DC-SATA User Manual

Storage enclosure for 2.5” sata hard drives
Table of Contents

Advertisement

DC-SATA
Package Content
may vary,
depending on
vendor & version.

System Requirements

PC Requirements

• Minimum Intel Pentium III CPU 500MHz, 128MB RAM
• USB 1.1 equipped PC; Windows 2000, XP, Vista
• USB 2.0 equipped PC; Windows 2000, XP, Vista
• 1394a equipped PC; Windows 98SE, 2000, XP, Vista
• 1394b or eSATA equipped PC; Windows 2000, XP, Vista

Mac Requirements

• Minimum Apple G4 processor, 128MB RAM
• USB 1.1 equipped Mac; Mac OS 10.2 or above
• USB 2.0 equipped Mac; Mac OS 10.2 or above
• 1394a equipped Mac; Mac OS 10.1.5 or above
• 1394b or eSATA equipped Mac; Mac OS 10.2 or above

Package Contents

• DC-SATA enclosure
• External power adapter; Input 100-240V, Output +5V/2A
(please note: USB-only version is bus powered - therefore for
this model the power adapter is optional)
• Interface cables
• Manual

LED Indicator

The DC-SATA USB 2.0 is using a double coloured LED.
Status ON, power ON
Status ON, data access *
Status OFF
* Red LED flickers during data access.
The DC-SATA 400+, 800+ and S2 are using a single blue LED.
Status ON, power ON
Status ON, data access
Status OFF
Page 2 / Chapter 1 - Introduction
User Guide
Green LED
Red LED
ON
OFF
ON
ON
OFF
OFF
Blue LED
ON
Flickering
OFF

Advertisement

Table of Contents
loading

Table of Contents