Table of Contents
Advertisement
GB
19-06-2003
9:09
Pagina 12
THIS UNIT EMPLOYS AN EXCLUSIVE CON-
DENSATION RECYCLING SYSTEM TO DISPO-
SE OF EXCESS MOISTURE. IN NORMAL
CONDITIONS, CONDENSATION IS DISPO-
SED OF AUTOMATICALLY. WHEN THE HUMI-
DITY IS PARTICULARLY HIGH, AN EXCESS OF
CONDENSATION MAY BUILT UP IN THE TANK
. WHEN THIS HAPPENS, IN THE DISPLAY
9
APPEARS
, INDICATING THAT THE TANK
SHOULD BE EMPTIED.
WHENEVER CONDITIONS OF HIGH HUMI-
DITY MAKE THE PROBLEM RECURRENT, YOU
MAY DISCHARGE THE EXCESS WATER
DIRECTLY INTO A DRAIN, USING THE RUB-
BER TUBE SUPPLIED; THE TUBE SHOULD BE
INSERTED INTO THE HOLE PROVIDED, AFTER
HAVING REMOVED THE RUBBER STOPPER.
SELF-DIAGNOSIS
The appliance is equipped with a self-diagnosis system which identifies any operating problems.
IF THE DISPLAY SHOWS...
H H P P
HIGH PRESSURE
LOW TEMPERATURE
F F F F
FAN FAILURE
P P F F
PROBE FAILURE
FULL TANK
12
O p e r a t i o n
....WHAT SHOULD YOU DO?
Insert and re-insert the plug. If the problem persists, call the service
centre.
If the machine is operating as an air-conditioner or dehumidifier, this
will prevent the formation of ice. The appliance will start up auto-
matically once the defrosting process has ended.
If either of these messages appears, call the service centre.
Empty the tank at the rear of the appliance and reposition correc-
tly.
MAKE SURE THE TANK IS PUT BACK COR-
RECTLY OTHERWISE IN THE
REMAIN
.
DISPLAY WILL
Advertisement
Table of Contents
