Table of Contents
Advertisement
5.2.9 Camera (IP) Configurations
FIGURE 17: Camera Configuration
The SPM-200 can display thumbnail images from up to four Internet Cameras on the Sensors Page. Note
that these cannot be simple "Webcams"; they must be cameras that have their own Internet interfaces. Note
also that the SPM-200 does not monitor or do anything with the images from the cameras except display the
thumbnails on the Sensors page. You must enter the IP address of each camera, and select the model from the
drop down menu. Only certain cameras are supported. This is necessary because every different Camera has
its own method of retrieving thumbnail images from it. Contact Newmar for information about what models
are currently supported.
Next is the Admin Info Section:
5.2.9.1 Admin Information
FIGURE 18: Admin Information
This is where you enter the information that will be printed at the bottom of every web page. Enter the
information that is appropriate for your installation. Again, don't forget to click the "Save Changes" button.
The next section allows you to Upload New System Firmware:
P.O. Box 1306
Newport Beach
California 92663
Phone: 714-751-0488
Fax: 714-957-1621
E-Mail: techservice@newmarpower.com
22
Hide quick links:
Advertisement
Table of Contents
