Chassis For The Cisco Nexus 3016 Switch - Cisco Nexus 3000 Series Installation Manual

Cisco Nexus 3016 Switch
S e n d d o c u m e n t c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
This section includes the following topics:
•
•
•
•
•

Chassis for the Cisco Nexus 3016 Switch

The 1-RU Cisco Nexus 3016 chassis (part number N3K-C3016-40GE) is 1.72 inches (4.37 cm) high,
17.3 inches (43.9 cm) wide, and 19.7 inches (50.8 cm) deep. This switch is designed for 19-inch (48.3
cm) racks. Its switch ports are at the rear of the chassis in close proximity to server ports, and the power
supplies and fan tray modules are accessible from the front for easy replacement. You can order this
switch with forward airflow or reverse airflow depending on whether the front of the switch is on a cold
aisle (forward airflow) or on a hot aisle (reverse airflow).
Fully populated with two power supplies and a fan tray, the switch weighs 20.5 pounds (9.3 kg) and can
be easily installed by one or two people.
Figure 1-1
to install and connect the chassis.
that you use to install and connect the chassis.
Figure 1-1
Cisco Nexus 3000 Series Hardware Installation Guide
1-2
Chassis for the Cisco Nexus 3016 Switch, page 1-2
Ports for the Cisco Nexus 3016 Switch, page 1-3
Power Supply for the Cisco Nexus 3016 Switch, page 1-4
Fan Tray for the Cisco Nexus 3016 Switch, page 1-5
Port Connections for the Cisco Nexus 3016 Switch, page 1-5
shows the front of the Cisco Nexus 3016 chassis and identifies the components that you use
Front View of the Cisco Nexus 3016 Switch
Chapter 1
Figure 1-2 shows the rear of the chassis and identifies the components
Overview of the Cisco Nexus 3000 Series Switches
OL-25338-04