Power Supply Status; Port Leds - Cisco Nexus 3000 Series Installation Manual

Appendix D LED Descriptions
S e n d d o c u m e n t c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
Table D-1
Component
Port LED
For a description of the status indicated by the two power supply LEDs, see the
section on page

Power Supply Status

This section describes the power supply LED indicators for the Cisco Nexus 3000 Series switches.
Table D-2
Table D-2
Condition
No AC power to the power supplies
Power supply failure (includes
overvoltage, overcurrent,
overtemperature, and fan failure)
Power supply warning events where the
power supply continues to operate
(high temperature, high power, and
slow fan)
AC present/voltage standby (VSB) on,
and power supply unit off
Power supply On and OK

Port LEDs

Table D-3
Table D-3
LED
Left
OL-25338-04
LEDs for the Cisco Nexus 3000 Series Fabric Extenders (continued)
LED
Indicates LED
status
D-3.
describes the status indicated by the two LEDs on each power supply.
Power Supply Status Indicated by the OK and FAIL LEDs
lists the LED descriptions for the RJ-45 Ethernet port LEDs.
Ethernet Port LED Descriptions
Status
Off
Solid green
Chassis and Module LEDs for the Cisco Nexus 3000 Series Switches
Status Description
Off The port is not active or the link is not connected.
Solid on The port is active. The link is connected and
(green) operational.
Solid on
The module or port is disabled through the CLI
(amber) command or the module is initializing.
Blinking
The port is faulty and has been disabled.
(amber)
OK LED Status (Green)
Off
Off
Off
blinking
On
Description
No link
Physical link
Cisco Nexus 3000 Series Hardware Installation Guide
"Power Supply Status"
FAIL LED Status (Amber)
Off
On
1 blinking
Off
Off
D-3