Chassis For The Cisco Nexus 3064 Switch - Cisco Nexus 3000 Series Installation Manual

Cisco Nexus 3064 Switch
S e n d d o c u m e n t c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

Chassis for the Cisco Nexus 3064 Switch

The 1-RU Cisco Nexus 3064 chassis (part number N3K-C3064PQ-10GE or N3K-C3064PQ-10GX) is
1.72 inches (4.37 cm) high, 17.3 inches (43.9 cm) wide, and 19.7 inches (45.0 cm) deep. This switch is
designed for 19-inch (48.3 cm) racks. Its switch ports are at the rear of the chassis in close proximity to
server ports, and the power supplies and fan tray modules are accessible from the front for easy
replacement. You can order this switch with forward or reverse airflow depending on whether the front
of the switch is in a cold aisle (forward airflow) or in a hot aisle (reverse airflow). You can also order the
switch with AC or DC power supplies.
Fully populated with two power supplies and a fan tray, the switch weighs 20.5 pounds (9.3 kg) and can
be easily installed by one or two people.
Figure 1-5
connect the chassis.
to install and connect the chassis.
Figure 1-5
1
1
2
3
4
Cisco Nexus 3000 Series Hardware Installation Guide
1-12
shows the front of the chassis and identifies the components that you use to install and
Figure 1-6
Front View of the Cisco Nexus 3064 Switch
2
1
AC or DC power supply (2) (AC power supply shown)
Fan tray (1)
Management ports (2)
ID LED
Chapter 1
shows the rear of the chassis and identifies the components that you use
3
4
Overview of the Cisco Nexus 3000 Series Switches
7
6
5
5 Status LED
6 USB port (1)
7
Console port (1)
OL-25338-04