GB-5750004200
11-02-2004
REMOTE CONTROL
Inserting the batteries
•
Slide the cover as shown in figure.
•
Insert two new batteries (not rechargeable)
making sure the (+) and (-) are in the correct
positions.
•
Put the cover back on, letting it slide into its ori-
ginal position.
•
The Display will show all of the remote con-
trol's symbols for several seconds.
Note: WE SUGGEST USING ALKALINE BAT-
TERIES (LR03).
If the remote control is to be replaced or
thrown away, the batteries must be removed
and disposed of in accordance with the cur-
rent laws as it represents an environmental
hazard.
When the remote control unit batteries are repla-
ced, the air-conditioning indicator
indicator
will flash alternately
on the remote control unit liquid crystal display.
To set the remote control unit correctly, while
is displayed, press any button.
If you do not press a button within 12 seconds, the
remote control unit will also make the heating
mode available, despite the fact that this function
is not available with this appliance.
PROPER USE
•
Point the remote control unit towards the air-
conditioning unit signal receiver.
•
Maximum distance: about seven (7) metres
(without any obstacle between remote control
and receiver).
•
The remote control must be handled with
great care: do not drop it, expose it to direct
sunlight, or leave it close to heat sources.
9:12
Pagina 23
and heating
23