Ring Function; Smart-Ring; Call-Ring - Icom IC-4008E Instruction Manual

' ' Smart-Ring

The ring function has an answer back feature. This allows you to
confirm whether or not a call has reached the receiving party even
if the operator is temporarily away from the transceiver.
q Set the same group channel number for
all of your group transceivers. (See left.)
w While pushing [PTT], push [UP]/[Y] .
• A beep is emitted and "
the display.
e Release the [PTT].
• When a member of your group an-
swers your call, the transceiver emits
beep tones for 10 sec. and blinks "
• When no answer comes back, the
transceiver emits short faint beep tones.
r Push [PTT] to answer and to stop the beeps and flashing.
NOTE: This function is available only when the called station
has set the same group number and the same operating chan-
nels as you.

' ' Call-Ring

Sends the ring tones during transmit
mode.
➥ While pushing [PTT], push [DOWN]/[Z]
to send a ring tone.
• The ring tone is emitted while pushing
[DOWN]/[Z].
• The microphone signal is automati-
cally cut while pushing [DOWN]/[Z].

RING FUNCTION

" blinks on
".
7
14