Icom IC-F6022 Instruction Manual page 8

1
PANEL DESCRIPTION
PRIO A/B KEYS
➥ Push to select Prorty A or Prorty B channel.
➥ Push and hold [Pro A (Rewrte)] or [Pro B (Rewrte)] for
1 sec. to rewrte the operatng channel as the Prorty A or
Prorty B channel.
MR-CH 1/2/3/4 KEYS
Push to select the memory channel 1 to 4 drectly.
MONI (AUDI) KEY
➥ Push to mute and release the CTCSS (DTCS) or 2-tone
squelch mute. Open any squelch/deactvate any mute
whle pushng and holdng ths key. (LMR operaton only)
➥ Actvates one of (or two of) the followng functons on
each channel ndependently: (PMR operaton only)
• Push and hold to unmute the channel (audo s emtted; 'Au-
dble' condton).
• Push to mute the channel (sets to 'Inaudble' only).
• Push after the communcaton s finshed to send a 'reset code'.
(5-tone operaton only)
NOTE: The un-mute condton ('Audble' condton) may
automatcally return to the mute condton ('Inaudble'
condton) after a specfed perod dependng on pro-
grammng.
4
LOCK KEY
Push and hold to electroncally lock all programmable keys
except the followng:
[Mon(Aud)], [Lock], [Call] (ncl. Call A and Call B), [Emergency],
[Survellance], [Sren], [Lone Worker] and [OPT 1/2/3].
LONE WORKER KEY
Push to turn the Lone Worker functon ON or OFF.
• If the Lone Worker functon s actvated, Emergency functon s au-
tomatcally turned ON after the specfied tme perod has passed
wth no operaton s performed.
HIGH/LOW KEY
Push to select the transmt output power temporarly or per-
manently, dependng on the pre-settng.
• Ask your dealer for the output power level for each selecton.
C.TONE CH ENT KEY
Push to enter the contnuous tone channel selecton mode.
Then, push [CH Up]/[CH Down] to change the tone frequency/
code settng. The selected channel remans set as the contnu-
ous tone channel untl another channel s desgnated as such.
TALK AROUND KEY
Push to turn the talk around functon ON and OFF.
• The talk around functon equalzes the transmt frequency to the
receve frequency for transcever-to-transcever communcaton.