Helpful Hints And Tips - Electrolux EHD60100P User Manual

8 electrolux
You can use the timer as a minute minder
while cooking zones do not operate. Touch
. Touch or
the time elapses, the sound operates and
00
flashes
Starting the STOP+GO
The function sets all cooking zones that
operate to a keep warm setting.
• Touch
to start this function. The sym-
bol comes on.
• Touch
to stop this function. The heat
setting that you set before comes on.
does not stop the timer function.
fully locks the control panel but not the
sensor field .
Locking / unlocking the control panel
You can lock the control panel, but not
It prevents an accidental change of the heat
setting during a cooking session.
Touch the symbol
on for 4 seconds.
The Timer still operates.
Touch the symbol
tion. The heat setting that you set before
comes on.
When you switch off the appliance, you also
switch off this function.

Helpful hints and tips

Cookware
• The bottom of the cookware must be
as thick and flat as possible.
• Cookware made of enamelled steel
and with aluminium or copper bot-
toms can cause discoloration on glass
ceramic surface.
Cookware for induction cooking zones
Important! In induction cooking a powerful
electromagnetic field generates an almost
instant heat inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel,
stainless steel, a multi-layer bottom
(marked as correct by a manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
to select the time. When
. The symbol comes
to switch off this func-
The child safety device
This function prevents an accidental opera-
tion of the hob.
Starting the child safety device
• Start the hob with
heat settings .
• Touch
until the acoustic signal. . The
symbol comes on. Switch off the ap-
pliance.
Switching off the child safety device
• Start the hob with
Touch until the acoustic signal.
comes on
• Switch off the appliance.
Overriding the child safety device for one
cooking session
• Start the hob with
.
comes on.
• Touch
until the acoustic signal. The
symbol comes on. Set the heat set-
ting in less than 10 seconds. You can
operate the hob. When you stop the hob
with , the child safety device operates
again.
Cookware is correct for an induction hob if
...
• ... some water boils very quickly on a zone
set to the highest heat setting..
• ... a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must be
as thick and flat as possible.
Cookware dimensions : induction
cooking zones adapt to the dimension of
the bottom of the cookware automati-
cally to some limit. But, the magnetic
part of the bottom of the cookware must
have a minimum diameter of approxi-
mately 3/4 of the cooking zones.
Operating noises
If you can hear
• cracking noise: cookware is made of dif-
ferent materials (Sandwich construction).
. Do not set the
. comes on.
. The symbol