Operating Instructions; Child Safety - Electrolux EHD60100P User Manual

Ceramic glass induction hob
Hide thumbs Also See for EHD60100P:
Table of Contents

Advertisement

6 electrolux
Heat setting displays
Display
-
/
-
Residual heat indicator
Warning!
Risk of burns from residual
heat!

Operating instructions

Use the induction cooking zones with
suitable cookware.
On and Off
Touch
for 1 second to start or stop the
appliance.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off
• you do not set the heat setting after you
start the hob.
• you cover a sensor field with an object (a
pan, a cloth, etc.) for longer than 10 sec-
Automatic Switch Off times
Heat setting
Stops after
The heat setting
Touch
to increase the heat setting. Touch
to decrease the heat setting. The display
shows the heat setting. Touch
the same time to switch off the cooking zone.
Switching the outer ring on and off
You can match the effective heating surface
to the size of the cookware.
The cooking zone is off
Keep warm/STOP+GO function is active
The cooking zone operates
Automatic warm up function is active
The induction cooking zone does not sense the cookware
There is a malfunction
A cooking zone is still hot (residual heat)
Lock/Child safety device is on
Power function is active
The automatic switch off is active
.
-
6 hours
5 hours
and
at
Description
The induction cooking zones make the heat
necessary for cooking directly in the bottom
of the cookware. The glass ceramic is slightly
heated by the residual heat of the cookware.
onds. The sound operates until you re-
move the object.
• the hob gets too hot (e.g. when a sauce-
pan boils dry). Before you use the hob
again, the cooking zone must be cool.
• you use incorrect cookware.
in the display and after 2 minutes the cook-
ing zone stops automatically.
• you do not stop a cooking zone or change
the heat setting. After some time
on and the hob stops. See the table.
-
4 hours
To switch on the outer ring touch the sensor
field
. The indicator comes on.
To switch off the outer ring touch the sensor
field
again. The indicator goes out.
comes on
comes
-
1.5 hours

Advertisement

Table of Contents
loading

Table of Contents