Description Of Control Panel - Electrolux EGO23000X Instruction And Installation Manual

Manuale di Installazione ed Uso
Instruction and Installation Manual

3. DESCRIPTION OF CONTROL PANEL

1
1. On/Off button
2. Two-digit display for error code and cycle selection
3. Stop/start button: when the waste disposer is not functioning, this button
starts it up, or if functioning, it stops it
4. Button for selecting shredding cycle
5. Button for selecting spraying time biological activator liquid (sanitizing)
6. Button for filter release
7. Red LED which signals biological activator liquid is finished
Control panel
Il control panel contains the buttons for switching on the waste disposer and
starting the shredding cycle. It allows you to select the various cycles that
determine the duration of cycle and other functions. On the panel there is also
a two-digit display that visualises error codes or the cycle code selected.
In addition to the commands shown in the plate, the waste disposer also has
an acoustic warning signal that activates after switching on, to indicate that the
waste disposer is ready for functioning, in case of breakdown/alarm and to
mark the end of a cycle.
2 3
Rev.: A
4 5 6 7
35/59