Fig - Electrolux EHM9780 Operating Instructions Manual

Fitting possibilities
On base cabinet with door
Adequate arrangements must be provided for in the con-
struction of the cabinet, to prevent possible contact with
the overheated housing of the top during operation. A
possible solution for avoiding this problem is illustrated
in fig. 21.
The panel under the top must be easily removed to allow
securing and release of the top in case of technical as-
sistance intervention.
On base cabinet with oven
The compartment must have the dimensions given in
fig.19 and must be equipped with supports for allowing
efficient ventilation.
Two possible solutions for preventing overheating are
described in fig. 22 and 23.
The electrical connection of the top and that of the oven
must be carried out separately, for electrical reasons and
to facilitate frontal oven removal.
Wall units or extractor hoods must be at least 650 mm
from the cooktop (Fig. 19).
a) removable cabinet panel

Fig. 21

Fig. 22 Fig. 23
b) possible space useful for
connections
1 1