Table of Contents
Advertisement
CLOCK FUNCTIONS
Clock function
You can use Duration
appliance to activate and deacti-
vate automatically: first set the Du-
ration
SETTING THE CLOCK
FUNCTIONS
1.
For Duration and End, set an oven
function and temperature. This is not
necessary for the Minute Minder.
2.
Press the Selection button again and
again until the indicator for the neces-
sary clock function flashes.
3.
Press + or - to set the necessary clock
function.
The display shows the indicator for the
clock function you set. When the set
time ends, the indicator flashes and an
acoustic signal sounds for two mi-
nutes.
With the Duration and End func-
tions, the appliance deactivates au-
tomatically.
4.
Press a button to stop the signal.
5.
Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Time of day
To show, set, or change the time.
Minute minder
To set a countdown time. This function has no effect
on the operation of the oven.
Duration
To set the length of an oven operation.
End
To set the switch-off time for an oven function.
at the same time if you want the
and then the End
hr min
hr min
Application
CANCELLING THE CLOCK
and End
FUNCTIONS
1.
Push the Selection button again and
again until the necessary function indi-
.
cator flashes.
2.
Push and hold the button -.
After some seconds the clock function
goes out.
ENGLISH
11
Advertisement
Table of Contents
