How To Turn Off A Burner; In Case Of Ignition Failure; How To Light A Burner - Electrolux EHS 7405 K User Manual

!
How to turn off a
1. To turn off a burner press the relevant
Burner Ignition Touch Control
flame level indicators go off.
The residual heat indicator remains on
until the pan support and the burner have
cooled down.
!
In case of ignition
The hob ignition device generates a series
of small sparks for about 6 seconds.
If the flame does not light during this period,
the gas flow to the burner is interrupted.
After 3 seconds, the ignition device
automatically repeats the ignition procedure
for another 6 seconds.
After three failed ignition attempts, a safety
device is set on the burner. The flame level
indicators flash.
Caution! When the safety device is
set on a burner, the burner controls
cannot be operated for about 60
seconds.
After 60 seconds, you can remove the safety
device on the burner by touching both the
Increasing Control
Control at the same time.
Then, follow the instructions given in the
paragraph "How to light a burner".
12
burner
. All the
failure
and the Decreasing