Something Not Working - Electrolux EHS 7405 K User Manual

Something not working

Some operating problems may be solved with simple maintenance operations or and
without the intervention of Technical Assistance.
PROBLEM
THE HOB
DOESN'T
WORK.
A BURNER
DOESN'T
WORK.
IT TAKES TOO LONG
TO FINISH THE
DISHES / THEY
ARE COOKED TOO FAST.
CAUSE
" There are blown fuses in the
domestic electrical system.
Switches are turned off or
there is no power at the
power outlet.
" The hob is not activated.
" The main gas supply tap is
closed.
" The gas bottle is empty.
" The hob has overheated and
a safety device has been set
on the four burners.
" The Child Safety function
has been inadvertently
activated.
" The safety device has been
set on the burner due to
repeated ignition failures.
The flame level indicators
and the residual heat
indicator flash.
" The pan support or the
burner cap and crown were
not correctly positioned
after cleaning.
"The burner crown holes are
obstructed.
" The defect persists.
" The flame level adjustment
is not appropriate.
!
SOLUTION
!Have the fuses replaced.
!Reset the switches.
!Touch the main ON/OFF
Control .
!Open the tap.
!Purchase a new bottle.
!Allow the top to cool (see
par. "Protection against
overheating").
! Deactivate the Child
Safety function (see par.
"Child Safety Function").
! Wait 60 seconds, then
follow the instructions
given in chapter: "In case
of ignition failure".
! Check
the
position (see par. "In case
of ignition failure").
! Follow the instructions
given in the section
"Cleaning
maintenance".
! Contact an authorized
technical assistance
centre.
!See the section "How to
light a burner"
correct
and
23