Electrolux EHS 7405 K User Manual page 29

Setting the hob for the new
gas type
1. If necessary, activate the top by touching
the main ON/OFF Control
3 seconds.
2. Touch the Timer Control
to select the auxiliary burner (front left
burner) on the burner selection display.
3. Touch the Increasing Control
hold the finger on it until the value 99
appears on the time display. Then, touch
the Decreasing Control
the finger on it until the value 80 is
displayed.
4. Then, touch the Increasing Control
until 83 is displayed. At this point, the
hob is set to the "Gas Change" mode
and the current gas setting appears on
the display:
n0
- stands for gas G20 (20 mbar)
n1
- stands for gas G30/G31 (30 mbar)
n2
- stands for gas G20 (13 mbar)
for about
repeatedly
and
and hold
29