Adaptation To Different Types Of Gas; Replacing The Injectors - Electrolux EHS 7405 K User Manual

Adaptation to different types of gas

Replacing the injectors

1. Remove the pan supports.
2. Remove the burner caps and crowns.
3. Using a 7 mm socket spanner
and remove the
them with the ones required for the new
type of gas
characteristics").
4. Reassemble the parts, following the
same procedure backwards.
5. Replace the Gas Type Label (located
near the gas supply connection) with the
one corresponding to the new type of
gas. The label is supplied in the
accessories plastic bag.
Should the feeding gas pressure be different
or variable compared with the required
pressure, an appropriate pressure regulator
must be fitted on the gas supply pipe, in
compliance with the rules in force.
Burner characteristics
TYPE BURNER
OF GAS
Rapid
NATURAL
Semi-rapid
GAS
Auxiliary
Rapid
LIQUID
Semi-rapid
GAS
Auxiliary
Rapid
NATURAL
Semi-rapid
*
GAS
Auxiliary
* Injectors for natural gas G20 13 mbar are for Russia only
28
unscrew
injectors, then replace
(see table "Burner
INJECTORS NORMAL REDUCED
1/100 mm
119
96
70
86
71
50
108
105
80
POWER POWER
kW kW
2,9 0,65
1,9 0,45
1,0 0,33
2,7 0,65
1,9 0,45
1,0 0,33
1,9 0,65
1,4 0,45
0,9 0,33
NORMAL FEEDING
POWER PRESSURE
3
m /h g/h mbar
0,276 -
0,181 - 20
0,095 -
- 196
- 138 30
- 73
0,201 -
0,148 - 13
0,095 -