Table of Contents
Advertisement
Demo mode
This mode is intended to be used in the shops to dem-
onstrate the oven functionality without any power con-
sumption except the oven lamp. To activate this func-
tion the appliance should be in stand-by mode.
—
Press button
and
onds (Fig. 16). An acoustic alarm will sound for a
short time.
—
Press button
and the "
in the display.
All oven functions can be selected.
The thermometer symbol will not flash anymore and
id
"
" indication will be replaced by number digits.
Follow the above described procedure to disable
the demo mode.
Error code
The electronic programmer does a continuous diag-
nostic check of the system. If some parameters are
not correct, the control unit will stop the activated
functions and the corresponding error code (letter "F"
followed by number digits) will be displayed.
for approximately 2 sec-
id
" indication will appear
Fig. 16
11
Advertisement
Table of Contents
