2. Locate a free Molex cable inside your computer. The
cable would come from your computer's power sup-
ply. Connect the male connector of the supplied
Molex cable to a female connector on a Molex cable
from the computer's power supply. The female con-
nector of the supplied Molex cable is an extra con-
nection you can use for powering another internal
device. Tuck the loose connector out of the way
where it will not interfere with any internal compo-
nents.
3. Check that all power connections are secure.
4. Close the cover of your computer.
Windows users:
Proceed to "Installing the Software."
Mac users:
Proceed to "Setting up the Drive."
– 22 –