Acomdata external E5 Serial ATA(SATA) User Manual page 19

FIGURE 2
Installing the PCI Card
Do not touch the gold connectors or any of the components
on the card. Handle the card by its edges. Adapter cards
are sensitive to electrostatic discharge (ESD) damage.
1. Carefully remove the PCI card from the packaging.
Handle the card by its edges. Take care not to touch
the gold connectors or any of the components on
the card.
2. Align the card's connectors with the PCI slot and
press down until the connector is inserted all the way
into the slot. You can apply a bit of pressure to firmly
secure the card into the slot (Figure 3, next page).
– 19 –
�����������������
���������������������
���������������������
���������������