Fat Filter; Shelf Support Rails - Electrolux EH L4-4 User Manual

Hide thumbs Also See for EH L4-4:
Table of Contents

Advertisement

Fat Filter

1. Clean the fat filter in hot water and
washing up liquid or in the dishwasher.
2. Badly burned on soiling can be removed
by boiling the filter in a little water to which
2-3 tablespoonsful of dishwasher clean-
er has been added.
Aluminium base plate
Never use cleaning materials, cleaning
agents or steel wool that scratch or
scour.
Do not clean in the dishwasher.
After each use, wash the aluminium base
plate using a soft brush in hot water with
washing-up liquid.
With stubborn dirt, soak for a while in hot
water with soap suds.
When cleaning, use a flat surface to pre-
vent the aluminium bas plate from de-
forming.

Shelf Support Rails

The shelf support rails on the left and right
hand sides of the oven can be removed for
cleaning the side walls.
Removing the shelf support rails
First pull the front of the rail away from the
oven wall (1) and then unhitch at the back (2).
Fitting the shelf support rails
Important! The rounded ends of the
guide rails must be pointing forwards!
To re-insert, first hook the rail into place at
the back (1) and then insert the front and
press into place (2).
Fat trap
The fat trap is almost maintenance free.
However, certain residues may occur due to
the frequent preparation of very fatty foods.
In this case proceed as follows for possible
cleaning actions:
Important: On the heating elements of
the oven roof, there is a risk of burns!
Ensure that the oven has cooled down
sufficiently so that you can touch heat-
ing elements safely
electrolux 25

Advertisement

Table of Contents
loading

Table of Contents