Table of Contents
Advertisement
How to use the clock functions
•
After a function has been selected, the
corresponding function indicator flashes
for about 5 seconds. During this period,
the desired times can be set using the
or
button.
•
When the desired time has been set, the
function indicator continues to flash for
approx. 5 seconds. After that the func-
tion indicator is then lit. The set time be-
gins to run.
•
Press any of the buttons to stop the au-
dible signal.
•
The desired oven function and tempera-
ture can be selected before or after the
clock functions Duration
are set.
•
When the cooking process is complet-
ed, turn the oven function dial and the
temperature selector back to the OFF
position.
Switching Off the Time Display
By switching off the time display you can
save energy.
Switching off the time display
Press and hold down any two buttons until
the display becomes dark.
Switching on the time display
Hold down any button until the time reap-
pears in the display.
The display can only be switched off if
none of the clock functions Duration
End
or Minute minder
Minute minder
1. Press the Selection
ly until the function indicator Minute
minder
flashes.
and End
,
is in use.
button repeated-
2.
Using the
or
sired Countdown (max. 2 hours
30 minutes).
After approx. 5 seconds the display shows
the time remaining.
The function indicator Minute minder
lights up.
When the time has elapsed, the function in-
dicator flashes and an audible signal sounds
for 2 minutes.
The signal can be stopped by pressing any
button.
electrolux 11
button set the de-
Advertisement
Table of Contents
