Table of Contents
Advertisement
INSTALLATION AND CONNECTION
INSTRUCTIONS
Installing the Dishwasher
•
The dishwasher must be installed on a firm floor
and adjusted to ensure that it is stable and level.
•
To compensate for unevenness in the floor and to
match the height of the appliance to that of sur-
rounding units extend the threaded feet by
unscrewing. Depending on the design of the
threaded feet use either
– an open-end spanner
or
– a screwdriver.
•
For built-in, integrated and fully integrated dish-
washers, the rear feet should be adjusted from the
front of the appliance using a screwdriver.
•
The drain hose, inlet hose and mains cable must
not be kinked or crushed when the dishwasher is
in position.
•
The dishwasher must also be screwed on tightly to
the work surface or to the adjoining units. This is
essential to ensure the diswasher does not tip.
24
Advertisement
Table of Contents
