Listening To The Music - IRiver Data Play IDP-100 User Manual

LISTENING TO MUSIC
Connect the earphones as below.
Turn the power of the player on as below.
To protect the player
from pollutants, the
anti-dust cover is necessary. When
you eject media from the player,
open the anti-dust cover first!!
Insert the media in the media compartment.
You can record and play on both sides of the media. Insert the media in the
compartment with the side to be played or recorded facing down.
12
LISTENING TO MUSIC
To play
Press the /EJECT button.
To select the music
: To select the previous music
To select the Equalizer.
: To select the next music
To adjust the volume
VOL : To increase volume
VOL : To decrease volume
To pause playback
Press the /EJECT button. If pressed
To get to Stand By Mode
again, the file starts from the paused
point. Approximately 1 minute later after
playback has been paused, the player
turns off to reduce battery consumption.
To change the media
You can change the pause off time by
option.
To search the music
13
/ : Hold pressed /
buttons to search fast reverse or advance
the music.
Press the EQ button repeatedly for
the desired mode and watch the display.
The EQ pattern changes with each press
of the button as shown below.
NORMAL CLASSIC JAZZ
ROCK ULTRA BASS USER EQ
Press and hold the EQ/STAND BY
button. (about 1sec)
Press and hold the /EJECT button.
EJECT indicator on the LCD displays and
then NO Media appeared.