Motorola W4 User Manual page 14

DISPLAY AND LIGHT INDICATORS
Display/Light Meaning
BUSY light on Displayed conventional mode has
activity on it, or selected trunked
system is currently busy. Wait for
callback.
XMIT light on Indicates you are transmitting.
Dir indicator lit Radio is in direct (mobile-to-
mobile) operation.
PRI, NPRI Mode displayed is in scan list with
indicators lit the indicated priority level.
P displayed Telephone dialing pause. Press
Sel to continue the dialing.
NO ACK displayed Unit being called with the
Enhanced Private Conversation or
Call Alert Page feature is not in
service, or emergency alarm or
status/message transmission is
not acknowledged by dispatcher.
Unit being called with Enhanced
NO ANSWR
displayed Private Conversation or Call Alert
Page does not respond, but is
operational.
Radio is in emergency alarm or
EMERGNCY
displayed call state.
NO EMERG A mode incapable of emergency
displayed transmission has been selected.
OUT RNG displayed Radio is out of range of the
trunking system.
ALERT TONES
Type of Tone Name
1 Low-Pitched Invalid Key
Tone Alert
1 High-Pitched Central
Tone Acknowledge
or Valid Key
4 High-Pitched Dispatcher or
Tones Mobile Unit
Acknowledge
5 High-Pitched
Tones
2 High-Pitched Private
Tones Conversation
4 High-Pitched Call Alert Page
Tones every 6
seconds
3 Short High- Automatic Call
Tones (after Back or Talk
requesting a Permit
busy channel)
(upon pressing
the PTT button)
ALERT TONES (Continued)
Explanation Type of Tone
Feature button Low-Pitched
pressed is not valid Tone (upon
in selected mode, or pressing the
a Call Alert or PTT button
emergency alarm during Transmit)
was not (Operation
acknowledged. Error)
Central controller
has received request
for Call Alert or
emergency alarm
transmission.
You pressed a valid
key.
High-Pitched
Dispatcher is
Tone every 10
acknowledging your
seconds in
emergency
unmuted receive
transmission. Mobile
condition
unit has received
your Call Alert.
The above two
acknowledge tones,
heard in tandem.
Examples: Not exiting phone mode after a call (radio
You have an
cannot receive fleet or subfleet calls), transmitting in
incoming call. Press
receive-only conventional mode, trying to select a dynamic
Call, then the PTT
mode when no dynamic ID assignment has been made.
button, then talk.
Call Alert page has
been received.
Channel is available
for previously
requested
transmission.
System is accepting
your transmission.
Name Explanation
Talk Prohibit/ Out of trunked radio
Out-of-Range, system range or
or Time-Out system is out of
Timer, or Illegal service.
Mode Present transmission
will soon be disabled.
You have entered a
mode where normal
system traffic will be
missed, or you
attempted something
that is not allowed.
(See examples
below.)
Failsoft System central
controller failure. The
radio reverts from
trunked operation to
operation similar to a
conventional
repeater.
Others may share
the channel.