Motorola W4 User Manual page 125

To edit, do any or all of the
following:
• To enter a character at the
blinking cursor, refer to the
table on page 98.
Press the key of the
desired character the
number of times shown in
the table. For example, to
enter the character C,
press the 2 key three
times.
• To leave a space in the
text, press the Mode up
rocker switch to move the
blinking cursor to the next
character position, and
then enter the next
character.
• To delete characters, press
the Mode down
switch to move backwards
over existing characters.
When the last character on
the display has been
erased, press the Mode
down
again to leave the name-
edit mode, without making
any changes, and begin
the procedure again at
step 2.
5 To save the changes, press
and hold the Sel button.
ASTRO Digital Spectra and Digital Spectra Plus Model W4, W5, W7, and W9
rocker
rocker switch
Trunking Operation
97