Motorola W4 User Manual page 15

®
ASTRO Digital Spectra
and Digital Spectra Plus
W9 Mobile Radio
Quick Reference Card
PRIORITY
INDICATOR
SCAN CALL
XMIT BUSY
Emer Dir Scan Srch Call
Pri
Non
Pri
Mode Vol Sel Home
MODE SELECT HOME
NON-PRIORITY
INDICATOR
®
BASIC OPERATION
Turn the Radio On and Off
Slide the power switch on the bottom of the control
unit to the left.
Set the Volume and Squelch
1 Hold the Vol rocker switch down to increase or
decrease volume as desired, then release.
The display shows volume levels from 0 to 15.
2 On conventional modes with Private-Line or Digital
Private-Line, press Sql or remove the microphone
PHONE
from the hang-up clip to defeat the coded squelch.
3 Press Sql again to return to coded-squelch operation.
4 To adjust squelch level, hold Sql until a tone sounds.
DIM
5 Press the Mode rocker switch to select squelch level.
1 2 3
Page Rpgm
Site
6 Press Home.
4 5 6
Phon H/L Lock
Change Modes
7 8 9
Sts Msg
0
Press the Mode rocker switch to scroll to the desired
Rcl Sql Del
mode
OR
RECALL DELETE
SQUELCH
Press Home to access the preprogrammed Home
mode.
Transmit
1 Press and hold the microphone PTT button.
2 When the transmit light comes on solid and no alert
tones sound (or a talk-permit tone or ID sidetone
sounds), speak into the microphone in a normal voice.
3 State your FCC call sign at the beginning of each
transmission.
Transmit (Conventional Modes)
1 Press Dir (Direct). The Dir indicator lights.
2 Press Dir again to return to repeater operation.
TELEPHONE OPERATION
Make a Phone Call
Press Phon to select the phone function. The display
shows the last phone number dialed or a series of
dashes.
Dial the Displayed Number
1 Press Sel or the PTT button, and wait for dial tone.
2 Press Sel or the PTT button again to dial the
displayed number.
Dial a Number from the Pre-Stored List
1 Press the Mode rocker switch to scroll to the number
or name you want to call.
2 Press Sel or the PTT button, and wait for dial tone.
3 Press Sel or the PTT button again to dial the
displayed number.
Dial or Direct Dial a New Number
1 Using the keypad, enter the telephone number.
2 Press Sel or the PTT button, and wait for dial tone.
3 Press Sel or the PTT button again to dial the
displayed number.