Dip Switch Usage Guide - Gefen Audio Extender DVI User Manual

Gefen CAT5 Extreme products (sender and receiver) both contain a pair of dip
switches located underneath the unit. These dip switches are used to select from
sets of confi gurations that will equalize the signal to best match the conditions in your
setup.
Receiver Confi guration
Dip #1
Off
On
Off
On
Dip #1
On
On / Off
Off On / Off
On On / Off
Adjustment Guidelines:
1) Dip #1 and Dip #2 on the receiver are Equalization Controllers
a) When both are OFF Equalization is zero => Good quality cables or Bad
quality short cables.
b) When both are ON Equalization is max => Bad quality long cables.
2) Dip #1 on the sender side should be ON when a short and good quality cable is
connected

DIP SWITCH USAGE GUIDE

Sender Confi guration
Dip #2 Dip #1
Off Off
Off Off
On Off
On Off
Dip #2 Dip #1
Off On
Off On
Off
Off
Dip #2
Off Very Good quality cable
Off
Off
Off
Dip #2
Off Very Good quality cable
Off
Off
Off
5
10m to 33m Cables
Good quality cable
Medium cable
Bad cable
2m to 10m Cables
Good quality cable
Medium cable
Bad cable