HOW TO CONNECT THE DVI AUDIO EXTENDER
Connect your source to the DVI Audio Extender sender unit using the included DVI
1
Cable.
Connect the audio from your source to the DVI Audio Extender sender using the
2
included analog RCA cables or optional digital audio cable.
Connect your display to the DVI Audio Extender receiver unit using a DVI Cable.
3
Connect the audio on your display or audio receiver to the DVI Audio Extender
4
receiver unit using the analog RCA cables or optional digital audio cable.
Connect your CAT-5 cables between the sender and the receiver
5
Plug the 5V power supply into the DVI Audio Extender sender and receiver unit
6
You should now have picture and sound. If you do not see a picture, try unplugging
7
and re-plugging the DVI input on the DVI sender unit. Make sure your CAT-5 cables
are not crossed. Recycle the power on the unit.
* If problems presist try adjusting the Dip Switches by following the Dip Switch
Usage Guide.
4