Pc Health Status - Abit NF8 Pro User Manual

3-22

3-8. PC Health Status

You can set the warning temperature for your computer system, and you can check the fan speeds and
power supply voltages of your computer system. The features are useful for monitoring all the important
parameters within your computer system. We call it the PC Health Status.
Shutdown Temperature
CPU Warning Temperature
CPU Temperature
System Temperature
CPU FAN Speed
SYS FAN1 Speed
SYS FAN2 Speed
CPU Core Voltage
DDR Voltage
ATX +3.3V
ATX +5V
ATX +12V
AGP VDDQ Voltage
HT Voltage
Standard Voltage(+5V)
↑↓:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
Shutdown Temperature:
Five options are available: Disabled $ 60℃/140℉ $ 65℃/149℉ $ 70℃/158℉ $ 75℃/167℉.
The default setting is Disabled. You can set the processor shutdown temperature here. If the processor
temperature exceeds the settings value, system will force to shutdown to protect the processor not
overheat.
CPU Warning Temperature:
This item lets you select the temperature at which you want the system to send out a warning message to
the PC speakers of when the temperature goes beyond either limit. You can select the temperatures you
want.
All Voltages, Fans Speed and Thermal Monitoring:
These unchangeable items list the current status of the CPU and environment temperatures, fan speeds,
and system power voltage.
NOTE: The hardware monitoring features for temperatures, fans and voltages will occupy the I/O
address from 294H to 297H. If you have a network adapter, sound card or other add-on cards that might
use those I/O addresses, please adjust your add-on card I/O address to avoid using these addresses.
NF8 Series
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
F6: Fail-Safe Defaults
Disabled
Disabled
O O8
48 C/118
O O
42 C/107 F
3125 RPM
4963 RPM
0 RPM
1.52 V
2.67 V
3.31 V
5.08 V
11.97 V
1.56 V
1.23 V
2.27 V
Item Help
F7: Optimized Defaults
Chapter 3