Raid Configuration - Abit NF-M2 NVIEW User Manual

RAID Configuration:

Click <Enter> key to enter its submenu:
RAID Function
x - Serial-ATA 1 RAID
x - Serial-ATA 2 RAID
x - Serial-ATA 3 RAID
x - Serial-ATA 4 RAID
↓↑→←:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
RAID Function
This item allows you to enable or disable the RAID function for Serial-ATA 1~4 ports.
- Serial-ATA 1 RAID ~ Serial-ATA 4 RAID
This item allows you to enable or disable the RAID function for each of the Serial-ATA 1~6 port
individually.
Back to Integrated Peripherals Setup Menu:
Init Display First
This item selects which display slot to initialize first when the system boots.
OnChip USB
Select the type of USB controller. Three options are available: Disabled
The default setting is V1.1+V2.0. If you choose to disable this item, the "USB Keyboard
Support" and "USB Mouse Support" items will not be available to select in Integrated
Peripherals menu.
- USB Keyboard Support
Select [BIOS] for the legacy operating system (such as DOS) that does not support USB
keyboard.
3-14
Phoenix – Award BIOS CMOS Setup Utility
RAID Configuration
F6: Fail-Safe Defaults
Disabled
Disabled
Disabled
Disabled
Disabled
Item Help
F7: Optimized Defaults
V1.1+V2.0
NF-M2 nView
V1.1.