Table of Contents
Advertisement
3-36
Chapter3
Resources Controlled By:
Two options are available: Auto(ESCD) and Manual. Default setting is Auto(ESCD). When
the setting is Auto(ESCD), the IRQ Resources can not be changed. When resources are
controlled manually, the IRQ Resources can then be changed.
The Award Plug and Play BIOS has the capability to automatically configure all of the boot
and PnP compatible devices. If you select Auto (ESCD), The IRQ Resources item will be
disabled as the BIOS automatically assigns them. But if you have trouble in assigning the
interrupt resources automatically, you can select Manual to set which IRQ is assigned to PCI
cards.
Figure 3-10 shows you the screen of IRQ resources. Each item has two options: PCI Device
and Reserved. The default setting is PCI Device.
Figure 3-10. PnP/PCI Configurations - IRQ Resources Setup Screen Shot
PCI /VGA Palette Snoop:
This option allows the BIOS to preview VGA Status, and to modify the information
delivered from the Feature Connector of the VGA card to the MPEG Card. This option can
solve the display inversion to black after you have used the MPEG card.
CX6
Advertisement
Table of Contents
