Integrated Peripherals - Abit CX6 User Manual

Hide thumbs Also See for CX6:

Table of Contents

Introduction of the BIOS

3-21

3-5. Integrated Peripherals

In this menu, you can change the onboard I/O device and other hardware peripheral settings.

Figure 3-7. Integrated Peripherals

Onboard IDE-1 Controller:

The onboard IDE 1 controller can be set as Enabled or Disabled. The default setting is

Enabled. The integrated peripheral controller contains an IDE interface with support for two

IDE channels. If you choose Disabled, it will effect the settings of four items not available.

For example, if you disabled the Onboard IDE-1 Controller, you will also disable the

Master/Slave Drive PIO Mode and Master/Slave Drive Ultra DMA.

Master/Slave Drive PIO Mode:

Six options are available: Auto . Mode 0 . Mode 1 . Mode 2 . Mode 3 . Mode 4 .

Back to Auto. The four IDE PIO (Programmed Input/Output) items let you set a PIO mode

User's Manual

Table of Contents