Abit CX6 User Manual page 28

2-14
PN1 (Pin 6-7): HDD LED Header
Note: Watch the HDD LED pin position and the orientation.
PN1 (Pin 8-9): Power on Switch Header
PN1 (Pin 10-11): Hardware Suspend Switch (SMI Switch) Header
Note: If you enable the ACPI function in the BIOS setup, this function will not work.
PN2 (Pin 1-2): Hardware Reset Switch Header
PN2 (Pin 4-5-6-7): Speaker Header
CX6
Attach the cable from the case's front panel
HDD LED to this header. If you install it in
the wrong direction, the LED light will not
illuminate correctly.
Attach the cable from the case's front panel
power switch to this header.
Attach the cable from the case's front panel
suspend switch (if there is one) to this
header. Use this switch to enable/disable the
power management function by hardware.
Attach the cable from the case's front panel
Reset switch to this header. Press and hold
the reset button for at least one second to
reset the system.
Attach the cable from the system speaker to
this header.
Chapter2