Table of Contents
Advertisement
Introduction of the BIOS
AC97 Audio:
Two options are available: Auto and Disabled. The default setting is Auto. If you set it to
Enabled, it will allow the BIOS to detect audio device you use. If an audio device is detected,
the onboard audio controller (810 chipset family) will be able to support it. If you want to
use the other audio adapter card to connect the audio connectors, please set this item to
Disabled.
AC97 Modem:
Two options are available: Auto and Disabled. The default setting is Auto. If you set it to
Enabled, it will allow the BIOS to detect the modem device you use. If a modem device is
detected, the onboard modem controller (Intel
If you want to use the other modem adapter card to connect the modem signal connectors,
please set this item to Disabled.
IDE HDD Block Mode:
Block mode is also called block transfer, multiple commands, or multiple sector read/write.
If your IDE hard drive supports block mode (most new drives do), select Enabled for
automatic detection of the optimal number of block read/writes per sector the drive can
support. The default setting is Enabled.
Power On Function:
This item allows you to select which way you want your system to power on. Five items are
available: Button Only . Keyboard 98 . Hot Key . Mouse Left . Mouse Right.
Default setting is Button Only.
The mouse wake up function can only be used with the PS/2 mouse, not with a mouse
that uses the COM port and USB connection. Mouse Left (Mouse Right) means, you
need to double click the mouse left (right) button, for the computer to power on. You
also need to note the compatibility issue with your PS/2 mouse. Some PS/2 mice cannot
wake up the system, because of compatibility problems. Also, if the specs of your
keyboard are too old, it may fail to power on.
®
810 chipset family) will be able to support it.
Note
3-23
User's Manual
Advertisement
Table of Contents
