Abit CX6 User Manual page 23

Installing the Motherboard
IRCIR1: IR Header (Infrared)
WOM1: Wake On Modem Header
WOL1: Wake on LAN Header
orientation
There is a specific orientation for pins 1
through 5, attach the connector from the IR
KIT or IR device to the IRCIR1 header. This
motherboard supports standard IR transfer
rates.
Note: Watch the pin position and the
orientation
If you have an internal modem adapter that
supports this feature, then you can connect
the specific cable from the internal modem
adapter to this header. This feature lets you
wake up your computer via remote control
through the modem.
Note: Watch the pin position and the
orientation
If you have a Network adapter that supports
this feature, then you can connect the
specific cable from the network adapter to
this header. This feature lets you wake up
your computer via remote control through a
local area network. You may need a specific
utility to control the wake up event, like
®
using the Intel LDCM
similar utilities.
Note: Watch the pin position and the
2-9
®
utility or other
User's Manual