Abit PX5 User Manual page 59

Quick Installation
Installing HDD LED connector:
PN1 - There is a specific orientation for pin 7 and pin 8. Connect the two-threads
IDE LED connector to the connector on mainboard.
Pin number
7
8
Installing Suspend and Power ON/OFF switch
connector:
Watch the pin position and the orientation
PN1 - There is a specific orientation for pin 10 and pin 11. Connect the two-threads
suspend switch connector of the computer case to correct pins of connector on the
mainboard. You can ignore this connector since most of computer cases do not
support this feature (the mainboard itself supports it).
Pin number
11
10
Sleep LED connector:
Connect the two-threads Green LED connector on the mainboard.
Pin number
10
9
Installing speaker connector:
pin 4 to pin 7. Connect the four-threads speaker cable to the PN2 connector pins
on the mainboard
.
Pin number
4
Name of the signal or signification
HDD LED signal ¡i LED Anode¡j
HDD LED signal ¡i LED Cathode¡j
Name of the signal or signification
Suspend
Ground
PN2 - This connector has a specific orientation.
Name of the signal or signification
LED' s Cathode
LED' s Anode
PN2 - There is no specific orientation for
Name of the signal or signification
+5VDC
Watch the pin position and the
orientation
A-3