Appendix A Quick Installation - Abit PX5 User Manual

Quick Installation
Appendix A
Appendix A will give you a simplified installation procedure, in order to
allow you to install tour mainboard quickly and correctly.
If you need further information or if you need to change some other settings, read
from Chapters 1.
Installing the CPU:
on the socket, and lower the lever back in position. Don' t worry, if you don' t respect
the correct orientation, you will not be able to insert the CPU.
Adjusting CPU voltage and speed:
and speed, set up the CPU in the CPU SOFT MENU™ of the BIOS SETUP. For
information about your CPU, refer t o appendices B, C or D, and to information
labeled on the CPU itself.
Installing DRAM:
Pentium are 64-bit CPUs, you have to use two 72-pin DRAM modules, or one
168-pin DRAM module.
Installing FDD:
with the drive to the FDD connector, and the other end of the cable to the FDC pin
connector on the mainboard.
Note: Be sure that the red line on the cable connects to the first pin of the
connectors.
Quick Installation
Lift up the lever of the CPU socket, insert your CPU
SIMM1 ~ SIMM2, DIMM1 ~ DIMM2 - Since
FDC- Connect one end of the 34-pin cable that comes
According to your CPU voltage
A-1