Abit PX5 User Manual page 12

2-4
PN1 - SMI (Hardware Suspend) switch
There is no specific orientation. Connect the two-thread hardware suspend plug
to the PN1 connector pins on the mainboard. Since most cases do not support this
feature, most of you ignore this instruction.
necessary as it is already a part of the mainboard.
Pin number
13
14
PN1 - HDD LED connector
This connector has a specific orientation.
connector cable attached to the case to the IDE LED connector on the mainboard.
Pin number
8
7
PN2 - Speaker connector
There is no specific orientation. Connect the four-thread speaker cable to the PN2
connector pins on the mainboard.
Pin number
4
5
6
7
PN2 - SP-LED (Sleep LED) connector
This connector has a specific orientation. Connect the two-thread Sleep LED
connector cable attached to the case to the SP-LED connector on the mainboard.
Pin number
10
9
Name or significance of the signal
+3VDC
Suspend
Name or significance of signal
LED' s Cathode
LED' s Anode
Name or significance of signal
+5VDC
Ground
Ground
Sound Signal
Name or significance of signal
LED' s Cathode
LED' s Anode
Furthermore, this feature is not
Connect the two-thread IDE LED
Chapter 2