System Configuration - Fujitsu MB2146-09B-E Operation Manual

4. System Configuration

■ Using the adapter as an emulator system
Connect the adapter between the host computer and the user system so that the adapter can serve as
an emulator under control of the host computer. For using emulator debugger software on the host
computer, refer to the "S
Figure 3 shows the system configuration when the adapter is used as an emulator system.
Host
computer
*1 : USB cable
*2 : Interface cable (flat cable of the adapter)
■ Using the adapter as a USB programmer
The adapter connects the host computer and the serial interface of MCU with built-in flash memory
made by FUJITSU SEMICONDUCTOR, and writes data in a built-in flash memory.
For information on the USB programmer, contact the their sales or support representative.
Figure 4 shows the system configuration when the adapter is used as a USB programmer.
Host
computer
*1 : USB cable
*2 : Interface cable (flat cable of the adapter)
2
Workbench OPERATION MANUAL".
OFTUNE
*2
*1
Adapter
Figure 3 System configuration (emulator system)
*2
*1
Adapter
Figure 4 System configuration (USB programmer)
User Adapter
interface interface
connector connector
User system
User Adapter
interface interface
connector connector
User system
MCU
MCU with
built-in flash
memory