Connecting The Telephone - Geemarc Large Display Alarm Clock User Manual

1 - CONNECTING THE TELEPHONE

(**) 230V
PTT plug
3
1 - Connect the PTT line cord.
2 - At your option you may connect your
telephone in the doubler plug.
3 - Connect the PTT doubler plug in the wall
socket.
4 - Connect the adaptor line cord.
5 - Connect the adaptor in the wall socket. (**)
(**)
Classified "hazardous voltage" according to EN60950 standard.
Electrical connection : The apparatus is designed to operate from a 230V 50Hz
supply only. (Classified as «hazardous voltage» according to EN60950 stan-
dard).
The apparatus does not incorporate an integral power on/off switch. To
disconnect the power, either switch off supply at the mains power socket or
AC adaptor
1
5
2
4
4
Shaker