Table of Contents
Advertisement
Things to note
•
This appliance is designed to be fitted
in cabinets of the recommended
dimensions as shown (Fig.3).
•
If your cabinet interior dimension is
between 565-570mm the oven may still
be
fitted.
modification to the cabinet will be
required to reduce the aperture size
down to 560-565 mm, to allow the
product to be securely screwed into the
cabinet.
•
The dimensions given provide adequate
air circulation around the unit within the
cabinet, ensuring compliance with BS
EN60-335.
•
Enquiries regarding the installation of
the cooker point, if required, should be
made to your Regional Electricity
Company to ensure compliance with
their regulations.
•
The appliance socket switch should be
outside the cabinet but within 2m of the
appliance to make it accessible to
switch off the appliance in case of an
emergency.
•
To protect the hands, wear gloves when
lifting the oven into its housing.
Do not lift the appliance by the
handles.
Note: House circuit
Earth leakage and continuity tests must be
carried out before the appliance is
connected to the mains supply and re-
checked after fitting.
However,
a
minor
37
Advertisement
Table of Contents
