Step 8, Install Filters; Step 9, Finalize Installation - GE MONOGRAM ZV950 Installation Instructions Manual

36" stainless steel vent hood
Hide thumbs Also See for MONOGRAM ZV950:
Table of Contents

Advertisement

8 INSTALL FILTERS
• Remove protective film on the filters.
• Tip the filter into the slots at the rear of the opening.
Lift the filter and pull the knob forward until the filter
rests on the slots.
• Install all 3 grease filters.
9 FINALIZE INSTALLATION
• Remove the protective film covering the control
panel on the front face of the hood, and any other
124Dia23
packaging materials.
• Refer to the Owner's Manual for operating
instructions.
GE Consumer & Industrial
Appliances
General Electric Company
Louisville, KY 40225
ge.com
Installation Instructions
Note: While performing installations described in this book,
safety glasses or goggles should be worn.
For Monogram
local service in your area, call
TM
1.800.444.1845.
Note: Product improvement is a continuing endeavor at
General Electric. Therefore, materials, appearance and
specifications are subject to change without notice.
• To remove the filters, grasp the knob, push the filter
towards the rear and tilt downwards.
124Dia24
Pub. No. 49-80095-1
04/08 JR
Printed in Italy

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents