Table Of Contents - GE MONOGRAM ZV950 Installation Instructions Manual

CONTENTS
Design Information
Product Dimensions and Clearances ........................... 3-4
Optional Accessories ......................................................... 4
Installation Preparation
Advance Planning,
Ductwork, Framing ......................................................... 5
Power Supply ..................................................................... 5
Duct Fittings ...................................................................... 6
Tools and Materials Required .......................................... 7
Remove the Packaging...................................................... 7
Check Installation Hardware ........................................... 8
PRODUCT DIMENSIONS AND CLEARANCES
36" Vent Hood Installation Combinations
This Stainless Steel Hood can be installed over any
Monogram cooktop, including the Professional 36"
cooktop and 30" or 36" range.
25"
*The supplied duct cover fits 8 ft. to 10 ft. ceilings.
The vent hood must be installed 24" min. and 30" max.
above the cooking surface. The hood installation height,
from the cooking surface to the bottom of the hood,
depends upon ceiling height.
124Dia1
Installation
Height Depending
on Ceiling Height
36" Min.
Design Information
*Height
to Ceiling
10"
35-5/8"
Ductwork, Wiring Locations............................................. 8
Installation Instructions
Step 1, Install Framing for Hood Support ...................... 9
Step 2, Install Mounting Brackets .................................... 9
Step 3, Install Duct Bracket ............................................ 10
Step 4, Install the Hood .................................................. 10
Step 5, Connect Ductwork .............................................. 11
Step 6, Connect Electrical .............................................. 11
Step 7, Install Duct Covers.............................................. 11
Step 8, Install Filters........................................................ 12
Step 9, Finalize Installation ............................................ 12
Cooking surface to bottom of hood should be:
• 25-1/2" max. for 8 ft. ceiling height.
• 25-1/2" to 30" for 9 ft. ceiling height.
• 30" min. for 10 ft. ceiling height.
Plan the installation height carefully to avoid unsightly
gaps above the hood.
Installation with 36" Professional Cooktop or Range
(Models ZGU36 or ZDP36)
This hood must be installed 30" min. above a Monogram
Professional Cooktop or Range. Ceiling height for this
installation combination must be at least 8'5" high.
Note: The supplied 2-piece duct cover is adjustable to fit
8 ft. to 10 ft. ceilings. For ceiling heights greater than
10 ft. and up to 14 ft., order ZX14SDSS stainless steel
duct cover accessory.
ZV950SDSS Duct Cover
Dimensions
16"
24
23
11"
3
ZX14SDSS Duct Cover
Dimensions
16"
48
48
11"